Another quality design from Ballistic Metal, the Trax is a “chunky” aluminum ring sharing the raw aluminum finish found on several other models. Similar to the raptor in design, the ring has a rectangular profile with the full outer profile notched with grooves from front to back. If looking closely, one can see that the grooves almost appear threaded due to the tool marks as they were cut into the body.
Another great design by Ballistic Metal. The Raptor features a gear-like design along the outside of its brushed stainless finish. As is common with other Ballistic Metal designs, this adornment is on the larger size in height and width which helps with comfort. The machining on the ring is excellent, as is par for the course, but the inner profile is not as radiused as I would typically ask for… though it is well rounded to ensure comfort.
How about a shaft ring that features the width of a modest cock ring? It could be aggressively tight but avoid crushing the vessels in a narrow area of the shaft. Well that sure sounds interesting! Enter Ballistic Metal’s heavy duty shaft ring! It is exactly what it says on the tin: a nice, wide shaft ring for an as-intense-as-you-want-it erection. Just be sure to know your size before ordering!
There’s no doubt Ballistic Metal is one my favorite manufacturers to begin with, but to offer the ability to build a custom triple ring setup just seals the deal. After all, I absolutely adore cock and shaft combos. When custom built to exactly the size you want, the cock ring begins making things interesting while the shaft ring tightens down and your already engorged shaft to deliver an impressive and veiny erection that will make your day.
Ballistic Metal is always up to something interesting so when I saw them release somid brass cock, shaft, and glans rings I had to add to my collection. I went for the “narrow” size (3/8") to match the narrower height and find the results pleasing. The solid brass has a brushed finish from a higher grit medium so the finish is almost shiny. I wouldn’t change a thing!
Ballistic Metal describes the design process of Divet as keeping elegance and sophistication in mind. I tend to agree. This adornment certainly has a unique design with admirable tastes in the choice of lightly brushed stainless and a raised center section with divots reminiscent of bolt holes. Like a few rings in the collection, this gives industrial vibes as you gaze upon your member. The comfort level is quite high thanks to Ballistic Metal’s many years of experience producing adornments.
Everything you would ever want in a shaft ring, Ballistic Metal has delivered a nearly perfect example. This ring provides the exact diameter for a veiny display and a thick width that prevents digging into your shaft while so engorged. The brushed finish is a nice way to wrap the ring, though those preferring more “flash” may be left wanting for something polished or anodized (guess what? They have red and blue anodized available, too).
The Banshee comes screaming to you from Ballistic Metal with everything you expect from their signature styles and clever designs. In this installment, the ring is carved from the typical aluminum block and notched around the edges creating a crisp inlay and “spokes”. The width and height of the ring as well as the rounded edges ensure a comfortable fit for all day and all night wearing for those so inclined.
Coming in at a little less than a quarter of a pound, the Designer Series Double Accent ring from Ballistic Metal is a site to behold. The two rubber accents neatly offset the stainless steel providing for a handsome and elegant visage. As with many of the Ballistic Metal originals, this ring isn’t afraid of going after some wind. 3/4 of an inch creates a gorgeous bulge under whatever pants you may be wearing.
Weighing next to nothing, but shouting its style clearly with one look is what the GRIPZ ring is great at. The cool, sharp look of the aluminum is offset by a textured rubber inlay giving a manly and industrial style. The ring itself is relatively comfortable, but not AS comfortable as some of the larger rings in the Ballistic Metal lineup. This is to be expected with the diminutive proportions of the height and width.
Just like the Hellfire in many way, the Sidewinder is a handsomely designed piece of aluminum hardware. Being made from such a light material and being sized for comfort, this ring is an easy wearing companion for any day. The knurled outside of the ring would make you expect discomfort, but there is none to be found - likely thanks to the generous sizing of the height and width. The front-to-back holes give a nice design touch and invoke an industrial vibe.
For a long while there, Ballistic Metal was releasing new and interesting designs regularly - and the Hellfire is one such interesting design. With a thick band of modest width as the base, this brushed aluminum ring features 3/16" holes drilled along the full length of the band on its centerline. This gives the unmistakable impression of a rocket pod on an Apache attack chopper (which is also loaded out with the Hellfire missile).
As an experienced collector, I’ve long wanted a tapered ring that draws the eye from a wide base to a tightly and well presented package… and sure enough, Ballistic Metal delivered. The tapered ring reduces in size by about 1/4" depending on the size you order. Each edge is accentuated with a slight “bulge” leading to the edge to give a more decorative impression. The 2oz weight is negligible given that this ring is made of lightweight aluminum, but the nearly 1" width of the band definitely makes for a commanding display.
Copyright (c) 2022, ManAdorned; all rights reserved.
