Glans

Hard Man Outfitters Head Master Glans Weight

I don’t often wear glans rings, but when I do, I want to feel them all day long tugging on the end of my penis. The best way to do this is to add a bit of weight. My favorite in this arena is the eminently stackable HMO Heavy Donut, so as soon as I found the HMO Head Master Ring, you know I didn’t hesitate to buy!

Unlike the Heavy Donut, these no-frills weights feature only a brushed finish and slightly radiused corners. They are utilitarian in nature and are clearly design for the purpose not of adorning your manhood, but weighing it down.

Continue reading

Generic Silicone Shaft Rings

One of my absolute favorite glans ring is the Hardman Outfitters Heavy Donut. These things are great - stack them as much as you’d like to achieve the weighty pull the day is asking for. But those that have read through the review know that these things clack together when you’ve stacked several. I tried a few things to prevent them from doing so - from pulling them tight along the shaft to even trying to 3D print custom buffers. But why go through all that trouble when you can buy these cheap little rings from any generic Chinese retailer?

Continue reading

King Rings Father of Pearl Midnight Glans Ring

I mentioned in my FOP cock ring review that I stumbled across a matching cock and glans set in the King Rings secondhand products page - and wouldn’t you know it? They were just my size. Although I now own 9 King Rings cock adornments, this is my first glans ring from Scott. How does it stack up?

I shouldn’t have to say that the design and finish of ANY King Rings product is top quality as that is just what has come to be expected at the price point and from a well-established brand in the industry. The glans rings are no exception to this rule with this sample sporting a handsome piano black plating under a crystal smooth finish. I can’t quite put my finger on it, but I think the finish of the glans ring may differ in some way to those of the cock rings - it just looks… different. It seems to pick up finger prints more? Or perhaps that is just a side effect of my cock rings being flat while the glans rings feature a radiused outer profile? In any event, the finish is on par with what you would expect from King Rings.

Continue reading

Stainless Welded Double Glans Ring

A glans ring is always a delight to have, so I own several as any collector of adornments would. But despite the number of pieces in my collection collection and despite thinking I’ve “seen it all”, every now and again a new design comes along that offers a nice surprise. That’s exactly what I found in this devilishly simple twist on a classic wire glans ring. By simply welding a second glans ring roughly at the same angle of the corona, the designers of this cheap generic ring brought something new to the table. It’s kind of one of those, “Why didn’t anyone think of this before?

Continue reading

Hard Man Outfitters Titan Glans Head Ring

Yet another adornment from Hard Man Outfitters. As a newsletter subscriber, this one popped up as a freebie if you buy enough stuff. I figured… hell… why not? I’ve been meaning to buy some stuff from them anyway!

The design of this glans ring is very simple. It’s a band style ring with very slightly rounded edges and a highly polished stainless finish. Knowing the weight being so low (as measured, just under 1oz), I decided it probably wasn’t worth using as a glans ring and instead went with their 35mm option so I could wear it as a shaft ring. At 1.37" inner diameter (perfectly matching the size ordered) and a width of .405" it works A-OK as a shaft ring for my size, but the height at only .115" definitely makes it look like it’s far too tight as my manhood squeezes against the restriction.

Continue reading

ManAdorned Stainless Heavy Glans Ring

I am always seeking new ways to grow the collection, and what better way is there than to create yet another custom adornment? Inspired by this really great slash cut glans ring, I thought the design could be improved by enhancing the fit.

So how did it turn out? Fantastic, of course! With the opportunity to 3D print multiple attempts in order to finely tune the model, this ring perfectly fits my contours. Multipe iterations were required to find the exact curve of my glans. I didn’t realize that my head has such a dramatic curve (when looking from the side) starting practically diagonally, following a gradual slope, and ending with a curve back to near vertical at the base of the ring. At the same time, like most men, the corona and overall contour of the glans is offset a bit lower. Being able to design this adornment made it possible for me to offset the center hole, curve the edge exactly as needed, and adjust the length of the ring to find the perfect union of man and metal. If there was one thing to improve it would be to make the frenulum point longer, but I suspect that would very negatively impact comfort.

Continue reading

Gear Essentials Quarter Screw Glans Ring

Designed to match the tremendously comfortable screw series from Gear Essentials, the quarter screw glans ring is a lightweight, highly polished aluminum adornment. The rounded edges ensure comfort and the striking finish easily matches the half screw cock ring that is already in my collection. The only thing left is to purchase a shaft ring to complete the set - which, unfortunately, is lost to time given the untimely demise of Gear Essentials as a manufacturer.

Continue reading

Braided Steel Wire Glans Ring

Another Etsy find from steelcraftsman, this simple glans ring is made from a braided stainless steel twist wire (industrial!) captured with a bead to close off the loop. Beautiful and rugged in its simplicity, this glans ring looks great when paired with other industrial adornments .

Continue reading

Slash Fit Stainless Glans Ring

Suddenly, this glans ring started appearing in random browsings as I looked for new adornments - so I had to oblige and pick it up. Available from a number of online retailers on AliExpress and Etsy, this stainless steel glans ring is a typical “band” design that has been modified with a slash to follow the contours of the glans better.

The design is clever and I’m surprised by how much I appreciated the way the proportions fit the shape of my head so well. Typical band rings will require you either angle your head “upward” for the frenulum to ride atop the band or to keep everything ‘straight’ and leave a gap between the under side of your glans and the top of the band.

Continue reading

Weighted Magnet Glans Ring

An interesting Etsy find while browsing for… whatever, this weighted ring stuck out quickly. The interesting feature of this weight is the fact that it’s just a 1.25" stainless steel ball. At that size, it would be easy enough to wear all day long and even potentially disguise itself as your glans if detected through your pants. Unfortunately, the pictures on the listing weren’t super clear as to how this works. It’s nothing more than a rubber hose and a pair of magnets that attach to the stainless weight. This is fine enough for flaccid wearing while mostly still, but the strength of the magnets provided simply don’t have enough grip to hold on to the ball for all day use. Give it a bump, hop down a stair, or chub up too much and you’re liable to have a stainless steel ball drop out of the bottom of your pants leg! Have fun explaining that to onlookers. In any event, this is a cool addition to the collection if nothing for the novelty factor. Given my propensity to experiment and make things, perhaps I’ll look into replacing the magnets with much more powerful units…

Continue reading