Described as a chastity trainer, this cock and shaft combination cage is right up my alley because of my affinity to cock strap/shaft ring combinations. As with many cheap cages, this one is liable to pinch as you manouvre into it… but once it is on, the issue tends to subside. The cock ring on this device is perfectly sized, and the shaft ring matches at 1.35 inches. Unlike my other “trainer” cages, this one has a shaft cage that runs 1.
I love the tug of a heavy glans weight all day long - oftentimes the more the better. This adornment promises all the stretch I can take weighing in at almost a pound and a half! This ring is a two segment ring, like most ball stretchers, thay can be closed by tightening the allen head bolts holding the two halves together. Trying to put this ring on is a mixed bag.
AliExpress marketplace is a target rich environment for adornments. Given that many rings one would purchase online ultimiately originate in China (except a few standouts that make their gear in shop like Ballistic Metal and Blue Collar Fetish Wear), it’s a great place to find the same fare but for far cheaper prices and often times before it is available widespread here at home. In this case, the maker chose to take two stainless wire rings and bend them (as my favorite wire cock rings go).
If you love heavy adornments around your manhood, then head over to Etsy and take a look at what you can have made through Bad Ass Workroom. Have you ever thought that the Gear Essentials Omega is awesome… but just not BIG enough? Well, now’s your chance to spec out the largest wire cock ring imaginable. While the custom work isn’t exactly cheap and it does take quite a while to manufacturer and deliver from China, the end result is spectacular.
While I don’t often wear ball weights, I certainly have plenty in my collection. Sometimes you just want that tug, after all. None the less, this particular adornment has been popping up for years while browsing and I finally decided to give it a whirl. Like many cheap cages on AliExpress, this one is relatively loose fitting and “rattly” which leads to some severe pinches while attempting to put it on.
I love the tug of a heavy glans weight all day long - oftentimes the more the better. This particular adornment is especially nice because it weighs in at more than half a pound. I loved it so much, I bought two! With a full pound of weight stacked on my head, the stretch is delicious. This ring is a two segment ring, like most ball stretchers, thay can be closed by tightening the allen head bolts holding the two halves together.
Given that Blue Collar Fetish Wear uses quality materials at reasonable prices and great designs, I found myself back at their Etsy shop when I realized I hadn’t picked up a new adornment for the collection in a while. This five snap cock strap is made of supple, soft leather allowing for lots of adjustment. This example from BCFW not only includes excellent adjustability, but also a stainless steel D ring that any number if things can be clipped to.
Those that have collected cages a while probably noticed that some of the base rings are boxy but curved… and then had the same question I did: Why don’t they just make regular rings that way? Well, sure enough, they finally hit the market. This adornment features the same curve as my favorite wire cock ring but built upon a foundation of a wider style band. This gives it the boxy appearance and also adds to the comfort that the ring provides.
This interesting adornment features larger stainless steel balls soldered together to form a firm ring. The design is interesting and the size of the individual stainless beads reduces the pressure one would expect to feel from such a design. All in all, a decent addition to the collection.
Conceptually, this adornment’s design should be neat and unique. It is a silicone ring with two stainless steel half rings embedded inside. This should give the benefits of flexible silicone and the rigidity and constriction of stainless. Unfortunately, it all falls apart rather quickly. While the size is close to my preferred goldilocks size for a shaft ring, the inner profile of the ring is as thin as a typical wire ring.
Hard Man Outfitters has some unique shaft rings available in much thicker size than you may be used to. These thicker rings offer the boon of a reduced pressure point when erect and a bit more visual interest thanks to the wider ring. These are easily some of the best shaft rings available - I have a few for swapping into other adornments such as a strap/shaft combo and also keep an available 8mm and 10mm size depending on how the mood strikes me.
Schmuckcockring makes some really cool custom cock shields. These adornments, of course, surround your cock like any other ring would, but also extends above and below. This adds lots of visual interest by really drawing attention to your member but also serves the added benefit of reducing pinching of no mans land while seated. This sample form Schmuckcockring is an excellent example of the craftsmanship that goes into the rings. I am not sure what it takes to make a stainless ring, but this one shows no casting marks, manufacturing abrasions, or waviness along the body and ring.
While browsing Ebay for stuff I could repurpose to wrap around ny junk, this attractive bracelet stood out as a likely contender. Made of faux leather and accented with silver jewelry bands, all it took to repurpose was a razor knife, tape measure, gorilla glue, and knowledge if the size I wanted. As I’ve noted in many reviews before, I love cock and shaft combos so this pair of repurposed bracelets created a nicely matching set.
I mentioned in my review previously of Thunder that I had a little trepidation with going stainless after enjoying the excellent weight of tungsten carbide. Well, needless to say, I loved Thunder enough to buy his younger brother. Tempest continues to carry the torch in terms of quality and beauty. As my seventh King Ring… I knew what to expect when it comes to jewelry quality adornment for my manhood, so jumped at the opportunity of sporting this fresh new design.
As is to be expected from King Rings, the Thunder is an impeccable example of jewelery quality, brilliant design, and eye catching good looks. This is now my sixth ring and, as mentioned in other reviews, I can certainly say that the switch from tungsten carbide to stainless steel has left nothing to be desired. The sharp design, thick heft, and many reflective facets catch lots of light – giving a dazzling presentation to your manhood.
I’ve seen this design ring for years, but I’m more a silver or white gold person rather than gold. However, I do still think the design of a polished gold donut ring withna solitary gem is a great idea for adorning my manhood. Interestingly, I enjoyed my solid brass cock ring from Ballistic Metal so much I decided to purchase one of these… and couldn’t even find one. Finally I located one and scooped it up for my collection.
This stainless ring features a center section of raised/rippled black as an inlay. One may think the edges of the ripples may be uncomfortable, but thankfully that is not the case. Interestingly, I had this ring on my Amazon shopping list for years and forgot all about it… and it eventually became unavailable. As with the scarcity principal, not being able to buy it anymore meant that I really had to have it.
Cheap target of opportunity purchases on AliExpress sometimes work out for me. While browsing one day, I came across this jewelry style beaded shaft ring. It’s thin and cheap, but still visually interesting. Unfortunately, the sizing was a bit off and the ring is too small to use comfortably as a shaft ring. Perhaps if it were wider, I could get away with it… but the narrow profile hurts when things harden up.
These rings from Tangaland offer some stylish accents to your erection. Sized as standard shaft rings typically are sized, these rings bear an unfortunate height causing them to dig and pinch when engorged. I would say they’d be nearly perfect if not for the narrow bands given how attractive and stylish the designs are. Featuring stainless steel and accenting metals or gems, these rings really are neat additions to the collection… but the comfort challenges keep them from being regularly used
How about a shaft ring that features the width of a modest cock ring? It could be aggressively tight but avoid crushing the vessels in a narrow area of the shaft. Well that sure sounds interesting! Enter Ballistic Metal’s heavy duty shaft ring! It is exactly what it says on the tin: a nice, wide shaft ring for an as-intense-as-you-want-it erection. Just be sure to know your size before ordering!
As I tried more and more glans rings, I began gathering samples of various vendors’ offerings. In this case, all three rings from Hard Man Outfitters were great in their own way. Of the three, my favorite is the one on the left with the accent grooves. The left and center rings are very comfortable while the ring on the right features a little too sharp of an edge leading to easy pinching.
The perfect weighty glans ring ready for stacking for some serious weight. In my collection I have five of these style adornments for more than a pound pulling on my member while wandering the city - one at 20mm (~ .75"), two at 22.5mm (~.9") and two at 25mm (~1"). Beautiful in finish and crazy comfortable in practice, the only downside to this ring is that clanking in the pants from stacking multiples can give away your secret.
A clever studded design drives interest while donning this adornment. In the sunlight, the facets gleam from the polished finish. For me, the size is spot on and despite the lack of a radiused inner edge, the ring is still quite comfortable.
Described as a chastity trainer, this cock and shaft combination cage is right up my alley because of my affinity to cock strap/shaft ring combinations. As with many cheap cages, this one is liable to pinch as you manouvre into it… but once it is on, the issue tends to subside. The cock ring on this device is well sized for enhancement at 1.75", but the shaft ring is far too small at only 1.
While I do enjoy a good sounding rod, I’m not a highly experienced player. Thus, these two large tapered sounds are just too big for me to take. I’m sure with practice the 9.75mm plug can make its way in, but I doubt the 11.91 juggernaut to the right is ever in the cards for me.
Copyright (c) 2022, ManAdorned; all rights reserved.
