Those that have collected cages a while probably noticed that some of the base rings are boxy but curved… and then had the same question I did: Why don’t they just make regular rings that way? Well, sure enough, they finally hit the market. This adornment features the same curve as my favorite wire cock ring but built upon a foundation of a wider style band. This gives it the boxy appearance and also adds to the comfort that the ring provides.
This interesting adornment features larger stainless steel balls soldered together to form a firm ring. The design is interesting and the size of the individual stainless beads reduces the pressure one would expect to feel from such a design. All in all, a decent addition to the collection.
Conceptually, this adornment’s design should be neat and unique. It is a silicone ring with two stainless steel half rings embedded inside. This should give the benefits of flexible silicone and the rigidity and constriction of stainless. Unfortunately, it all falls apart rather quickly. While the size is close to my preferred goldilocks size for a shaft ring, the inner profile of the ring is as thin as a typical wire ring.
Another great design by Ballistic Metal. The Raptor features a gear-like design along the outside of its brushed stainless finish. As is common with other Ballistic Metal designs, this adornment is on the larger size in height and width which helps with comfort. The machining on the ring is excellent, as is par for the course, but the inner profile is not as radiused as I would typically ask for… though it is well rounded to ensure comfort.
Hard Man Outfitters has some unique shaft rings available in much thicker size than you may be used to. These thicker rings offer the boon of a reduced pressure point when erect and a bit more visual interest thanks to the wider ring. These are easily some of the best shaft rings available - I have a few for swapping into other adornments such as a strap/shaft combo and also keep an available 8mm and 10mm size depending on how the mood strikes me.
Schmuckcockring makes some really cool custom cock shields. These adornments, of course, surround your cock like any other ring would, but also extends above and below. This adds lots of visual interest by really drawing attention to your member but also serves the added benefit of reducing pinching of no mans land while seated. This sample form Schmuckcockring is an excellent example of the craftsmanship that goes into the rings. I am not sure what it takes to make a stainless ring, but this one shows no casting marks, manufacturing abrasions, or waviness along the body and ring.
This unique adornment is 3D printed from a wood material and finished with a body safe sealant. The design is striking with twisting spokes along the circumference and the curious material to 3d print makes it an obvious buy. The ring is comfortable to wear despite the spokes which would make one think they pinch and the darker color of the wood is very handsome.
While browsing Ebay for stuff I could repurpose to wrap around ny junk, this attractive bracelet stood out as a likely contender. Made of faux leather and accented with silver jewelry bands, all it took to repurpose was a razor knife, tape measure, gorilla glue, and knowledge if the size I wanted. As I’ve noted in many reviews before, I love cock and shaft combos so this pair of repurposed bracelets created a nicely matching set.
Almost identical to the Savage Rose as far as shape, fit, and materials go, the Woody from King Rings takes the design to a less “blingy” direction. The tungsten carbide is finished in midnight black and is accented with Koa and Zebra hardwoods for a gorgeous, but earthy expression. As with other King Rings, the supremely radiused inner profile and well rounded edges make this adornment as comfortable as your favorite donut cock ring.
I mentioned in my review previously of Thunder that I had a little trepidation with going stainless after enjoying the excellent weight of tungsten carbide. Well, needless to say, I loved Thunder enough to buy his younger brother. Tempest continues to carry the torch in terms of quality and beauty. As my seventh King Ring… I knew what to expect when it comes to jewelry quality adornment for my manhood, so jumped at the opportunity of sporting this fresh new design.
As is to be expected from King Rings, the Thunder is an impeccable example of jewelery quality, brilliant design, and eye catching good looks. This is now my sixth ring and, as mentioned in other reviews, I can certainly say that the switch from tungsten carbide to stainless steel has left nothing to be desired. The sharp design, thick heft, and many reflective facets catch lots of light – giving a dazzling presentation to your manhood.
I’ve seen this design ring for years, but I’m more a silver or white gold person rather than gold. However, I do still think the design of a polished gold donut ring withna solitary gem is a great idea for adorning my manhood. Interestingly, I enjoyed my solid brass cock ring from Ballistic Metal so much I decided to purchase one of these… and couldn’t even find one. Finally I located one and scooped it up for my collection.
This stainless ring features a center section of raised/rippled black as an inlay. One may think the edges of the ripples may be uncomfortable, but thankfully that is not the case. Interestingly, I had this ring on my Amazon shopping list for years and forgot all about it… and it eventually became unavailable. As with the scarcity principal, not being able to buy it anymore meant that I really had to have it.
Cheap target of opportunity purchases on AliExpress sometimes work out for me. While browsing one day, I came across this jewelry style beaded shaft ring. It’s thin and cheap, but still visually interesting. Unfortunately, the sizing was a bit off and the ring is too small to use comfortably as a shaft ring. Perhaps if it were wider, I could get away with it… but the narrow profile hurts when things harden up.
These rings from Tangaland offer some stylish accents to your erection. Sized as standard shaft rings typically are sized, these rings bear an unfortunate height causing them to dig and pinch when engorged. I would say they’d be nearly perfect if not for the narrow bands given how attractive and stylish the designs are. Featuring stainless steel and accenting metals or gems, these rings really are neat additions to the collection… but the comfort challenges keep them from being regularly used
As a crafty individual, I’m able to bring my hobbies to bear while customizing or creating entirely new adornments. In this case, I spent an afternoon modelling the ideal shaft ring and parameterizing the model (OpenSCAD) to support customization and adjustments. After a few prototypes, the perfect shaft ring was born precisely to the dimensions and style I wanted. The design of this adornment features a slightly flared base and gently radiused inner profile for supreme comfort.
Picked up from an Etsy shop, this finger ring was made super sized so I can instead use it as an adornment. I have to say, the way the chevron pattern perfectly lines up with the corona from underneath is gorgeous. The understated width of the ring other than the chevron itself ensures the attention stays on the accent and your rod.
This interesting concept features an adjustable glans ring from a out 1.2 inches to 1.5 inches. Unfortunately, the size is too large for a glans ring and won’t quite work for me as a shaft ring. When adjusted to a larger size, the gap in the ring guarantees a better fit… but also pinching and discomfort!
How about a shaft ring that features the width of a modest cock ring? It could be aggressively tight but avoid crushing the vessels in a narrow area of the shaft. Well that sure sounds interesting! Enter Ballistic Metal’s heavy duty shaft ring! It is exactly what it says on the tin: a nice, wide shaft ring for an as-intense-as-you-want-it erection. Just be sure to know your size before ordering!
As a crafty individual, I’m able to bring my hobbies to bear while customizing or creating entirely new adornments. In this case, I spent an afternoon modelling the ideal Kali’s Teeth glans/shaft ring and parameterizing the model (OpenSCAD) to support customization and adjustments. After a few prototypes, the perfect model was born allowing for choosing the diameter, spike height, spike size, and number of spike rows. Most interestingly, I was able to create this model and try a set of Kali’s Teeth for pennies before committing funds for something I may not enjoy.
As a crafty individual, I’m able to bring my hobbies to bear while customizing or creating entirely new adornments. In this case, I spent an afternoon modelling the ideal cock and shaft ring and parameterizing the model (OpenSCAD) to support customization and adjustments. After a few prototypes, the perfect Saturn ring was born precisely to the dimensions and style I wanted. The design of this adornment features two rings - one with a diameter ideal for cock and the other for the shaft.
As I tried more and more glans rings, I began gathering samples of various vendors’ offerings. In this case, all three rings from Hard Man Outfitters were great in their own way. Of the three, my favorite is the one on the left with the accent grooves. The left and center rings are very comfortable while the ring on the right features a little too sharp of an edge leading to easy pinching.
There’s no doubt Ballistic Metal is one my favorite manufacturers to begin with, but to offer the ability to build a custom triple ring setup just seals the deal. After all, I absolutely adore cock and shaft combos. When custom built to exactly the size you want, the cock ring begins making things interesting while the shaft ring tightens down and your already engorged shaft to deliver an impressive and veiny erection that will make your day.
The perfect weighty glans ring ready for stacking for some serious weight. In my collection I have five of these style adornments for more than a pound pulling on my member while wandering the city - one at 20mm (~ .75"), two at 22.5mm (~.9") and two at 25mm (~1"). Beautiful in finish and crazy comfortable in practice, the only downside to this ring is that clanking in the pants from stacking multiples can give away your secret.
It’s a neat idea to crown your corona with an adornment, literally… but this ring is far too stretchy and light weight to do much. It provides no constriction and the stretchiness makes it much more likely to slide or fall off - especially while getting down to business.
Copyright (c) 2022, ManAdorned; all rights reserved.
